F041C2F8-0936-42A7-B1B0-EFFBF74D9A8B.jpeg

Ultra Guard Flat

$48.99

Ultra Guard Waterbased Polyurethane is the ideal protective varnish designed to enhance and safeguard your interior surfaces with exceptional durability and ease of use. Non-yellowing and reinforced with silica for increased resistance to abrasion, ensuring your furniture, worktables, wood floors, and other surfaces look their best for years.

Versatile Application: Suitable for interior water-based paints and all types of bare wood.

Enhances Colour: While applied goes on whitish and dries transparent, enhancing both light and dark colours.

Available in Flat or Satin - 473ml

Ultra Guard Waterbased Polyurethane is the ideal protective varnish designed to enhance and safeguard your interior surfaces with exceptional durability and ease of use. Non-yellowing and reinforced with silica for increased resistance to abrasion, ensuring your furniture, worktables, wood floors, and other surfaces look their best for years.

Versatile Application: Suitable for interior water-based paints and all types of bare wood.

Enhances Colour: While applied goes on whitish and dries transparent, enhancing both light and dark colours.

Available in Flat or Satin - 473ml

Champness - Fusion Mineral Paint
from $10.90
Size:
Ultra Grip - Fusion
from $28.99
Size:
Fusion Tube Brush Soap
Fusion Tube Brush Soap
$24.00

Application Instructions:

  1. Prepare the Surface:

    • Painted Surfaces: Clean and degrease with TSP Alternative. Wait 24-48 hours after painting before applying.

    • Bare Wood: Sand smooth with 120-grit sandpaper, ensuring it's free from wax and contaminants. Remove dust before application.

  2. Mixing:

    • Mix thoroughly with a stick and wait 20 minutes before applying.

  3. Application:

    • Use a synthetic bristle brush or a microfiber roller. Sand lightly with 220-grit sandpaper between coats.

Number of Coats:

  • Painted Surfaces: 2 coats recommended.

  • Bare Wood & Non-Sealing Stains: 3 coats for optimal protection.

Drying Times:

  • Between Coats: Allow 3 to 48 hours. After 48 hours, lightly sand before the next coat.

  • Bare Wood: Apply the second coat after 3 hours without sanding.

  • Before Sanding: Wait 6 to 8 hours before sanding for a smooth finish.

You Might Also Like